Legit Check - Yeezy 350 v2 Beluga

Buy Authentic Adidas Yeezy Boost 350 V2 Beluga Here

How to spot fake

Adidas Yeezy Boost 350 V2 Beluga

in 34 steps

1. PROFILE

Learn how to spot fake Adidas Yeezy Boost 350 V2 Beluga's with this detailed 34 point step-by-step guide by goVerify.

2. RECEIPT

Check the details of the original receipt including date, store and amount paid. There should also be a 6 digit style number as well as a barcode number.

3. RETAIL BOX

Adidas Yeezy V2 sneakers come in a sturdy, unprinted retail box, featuring a large 350 and Boost logo on the top and side. There should be no cracking or flaking of the material along the edges or folds of the box. Remember real shoe boxes can accompany fake shoes.

4. BOX LABEL

Adidas shoe boxes feature a label on the one side detailing style name, size, color, country of manufacture and a style & PO number. Check all of these details carefully. Tip 1: Check that the style (ART) and PO (#) numbers match those found on the label inside the shoe. Tip 2: scan the barcode (even a photo of one) with a barcode scanner app, the exact product including size should be correct.

5. BOX LOGOS

On the side of the retail box is a Yeezy Boost 350, Adidas and Trefoil logo as well as the words Made by Adidas, Adidas.com/Kanye. Check the quality of the printing, make sure the logos are solid with clean sharp edges. Also make sure the typefaces used are correct, pay specific attention to the diagonal bar through the 0 in 350. Make sure the logos are center aligned within the side panel.

6. BOX CONSTRUCTION

The retail box will have well constructed supportive side walls to keep the box rigid and to improve protection. Check the structure of the folds, make sure that the top edges are square. The short sides of the box will be much thicker than the long sides. Check inside the box, take note of the large finger hole on the short side of the box, it will have a perforated fold to allow your finger in to pull the box open. Tip: The inner of the box is locked into the outer and the two halves cannot be separated easily without breaking the box.

7. WRAPPING

Adidas Yeezy Boost 350 V2's have wrapping inside the box to protect the shoes. The wrapping is a dark cream colour and the paper itself is thick and rigid.

8. SIDE PROFILE

Adidas Yeezy Boost 350 V2's have a distinctive side profile, take note of how the toebox lifts up off the surface while the heel remains relatively flat on the floor. Make sure the fabric curves inwards significantly at the Achilles heel. Check that the tongue stands up much higher than the back of the heel.

9. HEEL PROFILE

Yeezy Boost 350 V2 Beluga's have a very distinctive bulging outsole shape which is clearer when you look at the heel. Make sure the bulge is wider lower down than at the top, creating an almost pear like shape as opposed to a sphere. Also note how the vertical ribs on the outsole have rounded ends before they reach the top of the rubber. Look for the two horizontal join lines near the bottom of the outsole, the Boost V2's have a very different outsole construction to the original V1's. The vertical ribs will appear to cross over each other along this join line.

10. MIDSOLE PROFILE

If you look at the midsole at a slight angle you will clearly see the join between the two halves of the midsole wall and outsole. Make sure the vertical ribs have rounded edges along this join as opposed to being cut off. Take note of how the midsole has a concave section all the way along the instep side, this improves support and comfort for your foot arch.

11. TOE PROFILE

If you look at the shoe from the front you will notice the very pronounced pear shape bulge of the outsole. Also check that the stitch line that starts under the toe cap (and runs under the laces) is at a slight angle as opposed to a straight vertical line. Tip: If you look carefully you will notice the outsole under the toebox and forefoot area is actually concave.

12. HEEL STITCHING

High quality stitching can be hard to replicate, the heel area of Yeezy Boost 350 V2 Beluga's is a good place to check that stitch quality. Make sure the vertical stitching along the join in the upper is tight, neat and evenly spaced. Also make sure there is no excess glue showing along the join between the outsole rubber and the knitted upper.

13. HEEL DETAIL

Adidas Yeezy Boost 350 V2's have a highly detailed woven upper which is made up of three layers, Solar Red, Steeple Gray and Beluga. If you look closely at the vertical join along the heel you will see an intricate stitch pattern made up of criscross and horizontal stitch lines. Make sure the triple layer woven upper has lots of tiny holes in the top layer which allow the Solar Red layer underneath to show through. You will notice the weave of the upper is very inconsistent, it might even appear to break apart in certain places.

14. SWING TAG

New Adidas Yeezy Boost 350 V2 Beluga's will come with a swing tag explaining how the colour of the fabric might change. Some countries might have different languages on them. Check that the typeface used is correct, make sure the swing tag has very rounded corners. Make sure the printing is solid and sharp.

15. LACES

Adidas Yeezy Boost 350 V2 Beluga's come with high quality tubular woven laces. Make sure the weave is tight and even, make sure the lace tips are sealed with a clear cap and no loose ends show.

16. EYELETS

The lace holes in the knitted upper are barely visible, there are no eyelets. Make sure the colour of the laces and the knitted upper are almost identical.

17. SIDE LOGO

Adidas Yeezy Boost 350 V2 Beluga's have a SPLY-350 logo stitched into the woven upper. Make sure the typeface used is correct, pay specific attention to the bulges of the numeral 3, the top bulge is much smaller than the bottom bulge. This is a good opportunity to have a close look at the triple layer woven upper, make sure the weave is neat, tight and even.

18. COLLAR STITCHING

Adidas Yeezy Boost 350 V2 Beluga's have high quality stitching along the edge of the ankle collar, make sure the stitching is tight, neat and evenly spaced. Make sure the width of the hem is even and that the stitch line follows the edge of the hem perfectly. Take note of the diagonal join where the two ends of the hem overlap and join.

19. TONGUE STITCHING

Make sure the high quality stitching along the edge of the tongue is tight, neat and evenly spaced. Make sure the width of the hem is even and that the stitch line follows the edge of the hem perfectly.

20. EYELETS INSIDE

Adidas Yeezy Boost 350 V2 Beluga's have two suede patches that hold the laces in place that can only be seen from inside the shoe. Take note of how there are no stitch lines joining the patches to the upper. Make sure the bigger suede patch holding the top two lace loops is separated from the lower patch holding just one lace loop in place.

21. INSIDE LABEL (R)

Inside label details vary depending on year, country of manufacture and style. Look for the country of manufacture, shoe size, factory code (usually starts with 2-3 letters) and date of production (MM/YY). Make sure the style (ART) number and purchase order (#) number match the retail box label. Lastly there will be a 13 digit Unique Security Number, make sure it is different on each shoe, the last 3 digits are usually different. Tip: Google search "Adidas"+"ART number" to check that the colourway is correct.

22. INSIDE LABEL (L)

The second shoe label will be the same as the first shoe except for the 13 digit Unique Security Number. Make sure the last 1-3 digits are different.

23. INSOLE STITCHING

Adidas Yeezy Boost 350 V2's will have an insole with clean rounded holes cut into it showing off the Boost material underneath. Make sure the holes follow the shape of the insole. Make sure the stitching joining the insole to the upper is neat, tight and evenly spaced. Tip (1): Look for the U shaped resin structure inside the Boost material, you can just see it at about the midfoot area, it looks like a semi transparent gel. Tip (2): The Boost material will allow light to shine through it, when this happens you can see the cellular structure of the bubbles inside the Boost.

24. TOEBOX SUPPORT

Deep inside the shoe at the toebox you will see a suede support panel that holds the toebox open and helps it keep a rounded shape. This support panel will have rounded nodes along the bottom that run under the stitching which joins the insole to the upper.

25. HEEL SUPPORT

Adidas Yeezy Boost 350 V2's have a lot more comfort support than the previous model. At the heel there are soft Achilles patches molded into each side of the heel panel. Also look for the three vertical stripes that run down the center of the heel panel.

26. SOCKLINERS

Adidas Yeezy Boost 350 V2 Beluga's come with molded sockliners that provide comfort and support. Check the height of the edge along the heel, also take note of the shape of the impact patches on the forefoot and heel.

27. SOCKLINER LOGO

The sockliners will have an Adidas Yeezy logo printed on the top, make sure the printing is solid with sharp edges. Also take note of the antimicrobial fabric, it looks like a very fine weave.

28. SOCKLINER SIZES

Under the sockliner there will be a size code embossed into the rubber. Make sure the size matches the size of the label on the retail box and the label inside the shoe. Note how the sockliners often cover more than one shoe size, in this case both 8.5 and 9.5

29. SOCKLINER ADIDAS

Adidas Yeezy Boost 350 V2 Beluga's will have an Adidas and Trefoil logo debossed under the heel of the sockliner. Check the quality of the debossing, make sure the edges are sharp and clear. Make sure the typeface of the logo is correct, the letters should appear rounded. Make sure the tips of the leaves in the Trefoil logo have tinyl rounded bumps right up in the corners.

30. OUTSOLE

Adidas Yeezy Boost 350 V2 Beluga's have a very distinctive outsole pattern, make sure the tread is not worn out if the shoes are new. Make sure the thin horizontal ribs have rounded ends. Also note how the Boost midsole material (the bubble looking texture) is exposed through cut outs in the rubber outsole.

31. SOLE BOOST

Yeezy Boost 350 V2 Beluga's will have a Boost logo debossed into the main impact point on the heel. Make sure the debossing is clean and that the letters have a slightly rounded edge as opposed to a sharp edge.

32. BOOST MATERIAL

Adidas Yeezy Boost 350 V2 Beluga's come with a Boost midsole for energy-returning properties that keep every step charged with an endless supply of energy. The Boost material has a bubbly structure with a rough texture. Tip 1: Can you see the round dots within the texture, they have thin stripes embossed into them? Tip 2: The Boost bubbles are actually separate from one another before they are molded together, so sometimes in places is looks like they are breaking apart. The Boost material in the V2's seems much smoother and less textured than in the previous V1 Yeezy models.

33. FOREFOOT

Adidas Yeezy Boost 350 V2's have a translucent TPU outsole, at the forefoot there are a number of cut outs that allow you to see the Boost material underneath. Look for the bubble texture of the Boost material as well as the round dots with embossed stripes.

34. TOE LOGO

The toe tip of the TPU outsole will have an Adidas and Trefoil logo debossed into it. Make sure the typeface used is correct, make sure the letters are sharp and clear.

Buy Authentic Adidas Yeezy Boost 350 V2 Beluga Here